DHL Shipping for single product purchasing. Multiple pack would be fedex shipping, for reference only,the actual shipping carrier would be depended by the location,address,package dimension, product category, geographic location.
*Features*:
-
*
Efficient Dog Fencing System
*:
The transmitter,receiver and boundary wire forms an effective fencing system together to deter our dogs from the designated area,which greatly ensures our pets’ safety. The boundary wire creates an effective signal field when the transmitter is working. If your dog tends to walk out of the boundary,the transmitter will emit a harmless radio signal. Once the signal is detected by the receiver,it will automatically start beep or shock mode to urge your dog to go back into the boundary.
-
*
2 Effective Training Modes
*:
The receiver works automatically once you start up the system. It will send beep(4 levels) and shock(4 levels) as your dog try to cross the boundary wire. The closer your dog goes,the more intense the shock will be,effectively train him back to the play area you set.
-
*
Adjustable Control Distance & Collar
*:
The transmitter comes with .75 acre signal field range and 100 adjustable levels. The remote control distance can be increased .5m/1.6ft every 10 levels. The wire break warning can tell you in time if the wire is broken. Made of TPU,the collar strap is 28.3in long and equips with 34 holes in total,which can be adjusted to fit your dog’s neck properly. Fit for dog of all sizes.
-
*
Multiple Dogs Support
*:
One transmitter can pair with multiple receivers. With the 300mAh inbuilt rechargeable battery,our receiver keeps standby for around 2 days after fully charged for 2-4 hours. If the red indicator flashes quickly,it means the receiver needs to be charged. In addition,made of durable ABS material and featured with IPX7 waterproof level,our receiver greatly extends its service life,allows your dog to play in wet grass or rainy weather. Note:Our package only contains 1 receiver and 1collar strap.
-
*
Easy To Test & Use
*:
Easy to test. First,pull out at least 4m/13ft long boundary wire and strip off the insulating layer of both ends. Second,make an enclosed loop with the wire and insert both ends into the terminals on the transmitter. Third,install 2 metal probes on the bottom of the receiver,and put the test bulb on. Fourth,turn on the transmitter after inserting the power cord. Fifth,hold the receiver close to the boundary wire and observe. Easy to use. Comes with 20 training flags for you carry out proper training to ensure that the dog understands the boundaries and responds appropriately to the warning signals.
Friendly Reminder:
1. It’s important to adjust the collar to properly fit the dog’s neck.
2. For long-haired dogs,please trim some hair on your dog’s neck to ensure good contact of the metal probes.
3. It’s recommended to wear the collar for less than 8 hours per day. If possible,reposition the collar on the pet's neck every 1 to 2 hours.
4. Please keep this receiver away from children to avoid their playing causing unintended electric shock.
5. Beep and shock mode can’t adjust level intensity.
6. Proper training is essential to ensure that the dog understands the boundaries and responds appropriately to the warning signals.
7. If your dog is aggressive,you’d better to consult with an animal professional before using our electronic dog fence system.
8. Only suitable for dogs.
*Specifications*:
-
Product Type: Electric Dog Fencing System
-
Material: ABS
-
Collar Strap Material: TPU
-
Transmitter Voltage: 100-240V/60Hz
-
Receiver Input: DC12V/1A
-
Inbuilt Battery(Receiver): 300mAh Rechargeable Battery
-
Receiver Runtime: Around 2 Days
-
Receiver Charging Time: Around 2-4Hours
-
Receiver Modes: Beep(4 Levels); Electric Shock(4 Levels)
-
Waterproof Level(Receiver): IPX7
-
Signal Field Range: ≤3017 Square Meters/32474Square FT/0.75Acre
-
Adjustable Levels(Transmitter): 100 Levels
-
Remote Control Distance: Increases 0.5M/1.6FT Every 10 Levels
-
Boundary Wire Length: 200m/656FT
-
Suggested Wire Bury Depth: More Than 1in Underground
-
Per Flag Length:19.5cm/7.7in
-
Charging Cable Length(With Adapter): 102cm/3.3ft
-
Collar Strap Length: 72cm/28.3in
-
Transmitter Size: 14.3x8x3cm/5.63x3.15x1.18in
-
Transmitter Weight: 93g/0.26lbs
-
Receiver Size: 7.3x4.1x3cm/2.9x1.6x1.18in
-
Receiver Weight: 56g/0.12 lbs
-
Package Size: 31*21*5.5cm/12.2*8.27*2.17in
-
Package Weight: 986g/2.17 lbs
*Package Lists*:
-
1x Transmitter
-
1x Receiver
-
1x Collar Strap
-
1x Test Bulb
-
1x Adapter with 2 Split Cords
-
1 Coil x Boundary Wire
-
20 x Training Flags
-
2 x Long Metal Probes
-
2 x Short Metal Probes
-
2 x Screws
-
2 x Plastic Anchors
-
1x User Manual
Actual Product Photo
